| View previous topic :: View next topic |
| Author |
Message |
Immo
Joined: 25 Mar 2010
Posts: 2
|
 Posted: Thu Mar 25, 2010 7:53 pm Post subject: 2.47 firmware on 9100B showing video in legacy, not in yoics |
 |
|
Hi
I found this great firmware for my 9100B.
Flashed it, all seemed fine.
Now I connected my door-camera, the picture is showing in the legacy interface, but not in the yoics interface..
Anyone have any idea on that?
Thanks! |
|
| Back to top |
|
 |
mycal
Joined: 04 Dec 2006
Posts: 354
|
| Posted: Fri Mar 26, 2010 4:33 am Post subject: |
|
|
Do you have a password set?
If so turn off the password, then turn it back on.
Unfortunately Aviosys wouldn't help us fix their firmware so it has some quirks like this in it.
-M |
|
| Back to top |
|
|
Immo
Joined: 25 Mar 2010
Posts: 2
|
| Posted: Fri Mar 26, 2010 7:21 pm Post subject: |
|
|
Brilliant!
That seemed to be it..
Now I just need to get my spy hole camera to work again.
Thanks a lot! |
|
| Back to top |
|
|
bgrubb1
Joined: 27 Feb 2010
Posts: 2
|
| Posted: Sun Jul 04, 2010 8:25 pm Post subject: |
|
|
Sorry if I am a bit confused here.
DOES the YOICS interface work, via browser, with a password set ? This thread seems tp suggest that it does if you disable then re-enable, other threads seem to say not from browser, yes from the YOCIS program.
It does not appear to for me
Thanks in advance
..Barry |
|
| Back to top |
|
|
mycal
Joined: 04 Dec 2006
Posts: 354
|
| Posted: Tue Jul 13, 2010 10:14 pm Post subject: |
|
|
Yes yoics will work with a password set, but you must disable the password until yoics starts working, then you can re-enable. You may have to re-do it on a power failure or reboot.
But depending on how you use the 9100 you may not need a password anyway.
If your only ever remote accessing the 9100 with yoics then you do not need a password if your local network is secure. |
|
| Back to top |
|
|
|
